Tech Info

If you have baseband 05.11.07 you can Jailbreak & Unlock your Iphone for use on other GSM Carriers. Ultrasn0w has been updated to 0.92 it is dowanloadable via cydia must add sourcehttp://repo666.ultrasn0w....

GEORGE HOTZ wroteI have an unlock for 05.11.07. I will be releasing on 11/04/09, for $0.00First off, Jody Sanders, I am declining your $10,000. Why? Because you, and the rest of the iPhone unlock sites out there are scum. You make money selling freeware; that's not cool, and I am in no way going to legitimize it.Seriously, the people who really lose here are the customers. These sites are full of blatant lies, claiming to have unlocks for 05.11.07 People buy them, and are told the unlock is in development, and the release date...

The iPhone 3.1.2 update that Apple released last week required users of jailbroken iPhones or iPod Touches to wait for a new jailbreak software to be released before updating. There was no jailbreak available until Geohot released his new blackra1n 1 click jailbreak software. The blackra1n software is available for both Windows and Mac users, but it only supports iPhone, iPhone 3G, iPhone 3GS, and iPod Touch. blackra1n does not support...

First Create a Folder named “Pwnage” or whatever you like. Download iPhone 3GS 3.1 Firmware and PwnageTool 3.1.3 into that folder. Also do not forget to download Latest Version of iTunes, if you don’t have itConnect your iPhone to iTunes. Launch PwangeTool from the folder where you downloaded it.Now click on the “Expert Mode” and select your device “iPhone 3GS” in this case and click on the Blue Arrow.In the next step, Pwanage Tool will automatically find the ispw file, if it doesnt then browse for it and select the proper...

Apple released their iPhone 3.1 firmware on September 9, and now the iPhone Dev Team has released their Pwnage Tool 3.1 software which can jailbreak iPhone 3.1. There is no Windows Pwnage Tool 3.1, it only works for Mac. If you’re a Windows user then you’ll have to wait for the iPhone Dev Team to release redsn0w. If you’re a Mac user, then follow the steps below to jailbreak iPhone OS 3.1. The Pwnage Tool 3.1 software only works on the...

A bsdiff patch to apply to CommCenter in 3.1.2 to re-enable tethering is available here for the 3GS and here for the 3G. It's just a 2-byte patch as shown below (and an appropriate readjusting of the mach-o's codesign hash): USE THIS AT YOUR OWN RISK! Your carrier may end up charging you for unauthorized tethering access. Update #1 It looks like a lot of people have been looking at CommCenter lately because IRC user CleanAir had a similar tethering patch. Meanwhile over in the 2G CommCenter, WhiteRat and geniusan have...

To software unlock iPhone 3.1, you must create a custom firmware that uses the current baseband. The iPhone 3.1 update updates the baseband to a newer one that permanently blocks the software unlock. A guide on how to unlock iPhone 3.1 this will be up lat...

1. You must update to iPhone 3.1 first. After updating, either locate your iPhone 3.1 IPSW file or download it using any of the links below. Remember, don’t use Safari to download. Safari can’t download .IPSW files properly, use a different BrosweriPhone 3.1 download (iPhone1,1_3.1_7C144_Restore.ipsw, 241 MB)iPhone 3G 3.1 download (iPhone1,2_3.1_7C144_Restore.ipsw, 242 MB)iPhone 3GS 3.1 download (iPhone2,1_3.1_7C144_Restore.ipsw, 306 MB)2. Download redsn0w (not up yet, stay tuned!).3. Follow the jailbreaking guide at the Jailbreak...

Today the iPhone 3.1 update was released to the public. This update fixes a lot of bugs that were present in the iPhone OS 3.0 firmware. If you want to jailbreak or unlock your device, follow the steps below. If you have an unlocked iPhone 3G or iPhone 3GS do not update just yet, updating will permanently lock your device and the ultrasn0w unlocking software won’t wo...

redsn0w-win_0.8.zipredsn0w-mac_0.8....

Can you believe it, it’s been almost a year since the Apple’s App Store was officially released to public! Apple’s iPhone App Store was officially launched on July 11, 2008. Many users got to see it before the launch date due to a leaked copy of the iPhone OS 2.0 firmware.To celebrate the App Store’s first birthday, Apple has created a page in iTunes listing it’s favorite apps and favorite games. You can see the full list here (iTunes link).The...

UltrasnOw now works with 3GS Phones. You first need to Jailbreak your 3GS iPhoneThe main 3GS ultrasn0w glitch on hacktivated devices is: need to do Settings->General->Reset->Reset Network settings o...

This has been tested by me and worked on the first try..Head on over to Geohot’s I Make it Ra1n post for the jailbreak download and details. I haven’t been able to test this yet, but have heard good results from comments and tweets. I’ll be posting a full guide with details once I get the chance to jailbreak an iPhone 3GS with this.Note: The purplera1n jailbreak software is in beta, and Winterboard does not work with it. As of right now you can only jailbreak using Windows (it won’t work with Windows 7). You may want to wait...

Here are some new features that have been discovered in iPhone OS 3.1 beta so far:The baseband has been updated to 5.08.01 - ultrasn0w users should not use the iPhone OS 3.1 beta, otherwise their iPhones could be permanently locked!iPhone 3GS - When you’re trimming your videos you now have the option of saving the original video by tapping the “Save as copy” button.Voice Control is finally working over bluetooth now!When you move your icons around the iPhone vibratesMMS is enabled by default but does not work for AT&T usersThe...

Apple recently released the new iPhone OS 3.1 beta firmware and SDK to developers. If you’re using the ultrasn0w software unlock, DO NOT UPGRADE to iPhone OS 3.1 beta because you may permanently lose your unlock. Apple has updated the baseband to 05.08.01. Remember, even when the final iPhone 3.1 firmware is released you should not update if you want to keep your ultrasn0w unlock. Don’t say we didn’t warn y...

1. You half to have a Jailbroken iPhone.2. Open Cydia and search for OpenSSH and install.3. Reboot your phone.4. Download WinSCP and install.5.turn on WiFi connect to you WiFi network then touck the blue arrow to see your IP wright that down.6. Run WinSCP Host name:=IP address of your phone, Port number= 22, User name= root, Password = alpine, Then click Login. It might take a couple of times the first time you use it.7. You will get a screen that pops up, Click YesNow you are loged in to your phone.Note: Be care full not to...

You can find this setting in Settings> General> Network. Enable 3G (O...

Ultrasn0w for iPhone 3G & 3GS is ready!1.Ensure you have upgraded to iPhone OS 3.02.Jailbreak your iPhone 3G using redsn0w or PwnageTool (this will also install Cydia/Icy)3.Run Cydia or Icy4.Please add the repo repo666.ultrasn0w.com to Cydia or Icy. That last “o” is actually the number zero “0”! If you use the letter “o” you’ll get an error.5.Search for ‘ultrasn0w’ in cydia or icy and install ultrasn0w6.Reboot your iPhone 3G7.T-Mobile USA users should disable 3G before using ultrasn0w8.EnjoyNote: Remember to never upgrade...

You can download modified carrier bundles right here. To install this, Follow the steps in my MMS & Tethering iPhone 3.0 3g & 3gS Instructi...

Read the whole post in full before attempting anything!redsn0w is an easy to use, multi-platform, multi-device jailbreaking and unlocking (iPhone 2G only) tool for the iPhone 2G (original iPhone), the iPhone 3G (but not the 3GS) and also the iPod touch (first and second generation). Currently it is available for Windows and Mac OS X (there are some issues using redsn0w with OS X PPC, please use an Intel Mac until we have this problem resolved).REDSN0W PROVIDES SIMILAR FUNCTIONALITY TO QUICKPWN.If you want to build custom firmware...

1. Have a t-mobile account with the $10.00 webtogo2. Jailbreak and unlock your iPhone3. change your APN settings to t-mobile, internet2.voicestream.com ( See my blog on how to edit APN settings4. make sure you turn off 3G In Settings> General> Network. Enable 3G (OFF)5. Reboot your iPhoneYou now should have webtogo work...

If you have Firmware 3G 2.2.1 Baseband 2.30.03 do not upgrade your firmware until ultrasn0w is released. right now you can unlock your iphone using a GEVEY-3G-PLUS 2 SIM FULLY UNLOCKS FIRMWARE 2.2.1 (02.30.03) you can get one on ebay for $10....

If you need to change or fix your APN settings for getting on the Internet with other carriers. Using your iPhone go to http://www.unlockit.co.nz/ using a wifi connection if you don't all ready have an internet connection and follow the instructions click on custom APN select your carrier make sure to enable V3 Tethering + MMS then click Create Profile and it will auto install reboot your phone and your d...

Jailbreak your iPhone 3GInstall 3Proxy and MobileTerminal Fire up the “Cydia” application that was installed during the iPhone 3G jailbreakNavigate to Install>All PackagesFind and install MobileTerminalFind and install 3ProxyHit the “Home” button to verify that MobileTerminal is now installed on the homescreen (3Proxy isn’t a GUI app, so you won’t see an application icon)Create an ad-hoc WiFi network on your laptop laptop Name it something...

Tethering menu is locatedSettings >Genreal >Network >Internet TetheringFrom here you can turn ON or OFF Tether...

First, let's enable IPCC updates on iTunes 8.2.Mac OS X:Close iTunes if it is openStart Terminal (Applications > Utilities)Run the following command: defaults write com.apple.iTunes carrier-testing -bool TRUEWindows 2000/XP/Vista (32-bit):Go to Start -> Run (type in "command" and hit enterType/copy+paste this into the command console that comes up: "C:\Program Files\iTunes\iTunes.exe" /setPrefInt carrier-testing 1Hit enterWindows XP/Vista (64-bit):Go to Start -> Run (type in "command" and hit enterType/copy+paste this...